Frequently Asked Questions

• Do you immediately provide a report after the inspection?

  Because I put a lot of pictures in my reports, it usually takes me at least two hours to produce a report. I nearly always have the report finished and emailed by the end of the same day of the inspection.

• Do you inspect in Washington?

  I am not currently licensed in WA.

• Do you inspect for Pests and Mold?

  Yes, I visually inspect for evidence of WDI (Wood Destroying Insects) and Mold/Mildew and note anything found in the report. I do NOT perform mold testing, cannot identify whether mold is dangerous or not, nor how much mold is in the breathing environment.

• Do you walk on the roof?

  I walk any roof that I can get to by climbing one story when it is dry, safe, and a material that cannot be easily damaged. I inspect roofs that I cannot walk from the ground with binoculars or from a ladder. Though there is nothing as thorough as actually walking a roof, I can find most problems with binoculars.

• What other inspections do you recommend?

  • Sewer scopes are always a good idea.
  • Underground oil tank locating, especially for homes built before the 1970s.
  • Roofing specialist inspection for Wood Shingle or Wood Shake roofs.
  • An EIFS inspection for homes with Exterior Insulation and Finish System siding.
  • Mold, Lead, Asbestos, and Radon testing, if any of these are a concern for you.
  • Energy audit, if this is a concern for you. For a detailed analysis of the home, consider a Resnet or BPI energy audit.
  • Some conditions I find while inspecting warrant further investigations by a specialist. These may include:
    • Chimney/Fireplace when significant issues are noted.
    • Pest (Wood Destroying Insect) when significant damage is noted.
    • Geotechnical or structural engineer when significant soil grading, foundation, or structural issues are noted.
    • Electrician when widespread or significant issues are noted with the wiring or in the panels.